Flange Class

Flange dimensions, bolting and pressure-temperature class to ASME B16.5, drawn to scale.

The Flange Class tool gives ASME B16.5 flange dimensions and bolting, and finds the pressure class a duty needs from the pressure-temperature ratings. Pick the standard, class, nominal size, flange type and the pipe schedule a welding neck flange is welded to, and the tool draws the flange in section and front view to scale.

Dimensions and bolting

Pressure-temperature rating

Enter the material group, design pressure and design temperature. The tool reads the printed rating table, interpolates linearly between printed temperatures as the standard permits, applies the temperature limits in the material notes, and shows the lowest class that holds the pressure — with the duty point plotted on the rating chart. It refuses to answer outside the printed range instead of extrapolating.

Use it to check a flange rating for a new line, to read bolting for a material take-off, or to see how much margin a duty has before the next class is needed.

The metric and inch tables are printed separately by the standard and are read as printed, not converted. Ratings apply to the flange only; bolting, gaskets and external loads need their own checks.

Results are for reference and preliminary checks; a qualified engineer must verify them before use.