Gas Dehydration Unit

Glycol gas dehydration unit: feed gas, 84 process flow diagrams and a heat & material balance for each configuration. View the demo free.

The Gas Dehydration Unit tool covers glycol (TEG) dehydration of natural gas: removing water from the gas so it meets a water content specification before it goes into a pipeline or further processing. You describe the feed gas and the unit you want, and the tool shows the matching process flow diagram with a heat and material balance for every stream.

Three steps

  1. Enter the feed gas — temperature, pressure, flow rate and composition, plus the water specification. The lean glycol purity and circulation rate appear as you type.
  2. Pick the configuration — inlet scrubber, lean/rich glycol exchanger, reflux, stripping column and cooling. Your choices select one of 84 process flow diagrams.
  3. Set the design inputs on the drawing. Every input carries a numbered tag shown beside the equipment it acts on, and the heat and material balance runs on those numbers.

What you get

The demo drawing is free to view. Running the heat and material balance with your own inputs needs an account, and paid plans open more configurations and exports.

Results are for reference and preliminary checks; a qualified engineer must verify them before use.