Relief Load & PSV Sizing

Relief load by scenario, governing case, required orifice area and letter, and inlet / outlet line checks for pressure safety valves.

The Relief Load & PSV Sizing tool works through pressure relief for one piece of equipment at a time: the relief load for each overpressure scenario, the governing case, the required orifice area of the pressure safety valve, the selected orifice letter and its rated capacity, and checks on the inlet and outlet lines. Sizing follows API 520 Part I, relief scenarios follow API 521, and orifice letters follow API 526.

Three steps

  1. Add the equipment you protect — one tag per vessel; the scenario tabs belong to it.
  2. Add each relief scenario — external fire, blocked outlet, control valve failure, tube rupture and others. The tool marks the governing case.
  3. Read the orifice — required flow and area, the selected orifice, rated capacity and the capacity used, each with the clause it comes from.

What it checks

Each number shows where it came from, so the sizing can be reviewed line by line rather than taken on trust.

Several pieces of equipment can be kept in one project, each with its own list of scenarios, so a whole relief study can be built up and reviewed in one place.

Results are for reference and preliminary checks; a qualified engineer must verify them before use.